[BGService][WebApi]將obix帳密寫死的地方改成DB撈

Backend/Controllers/BuildMenuController.cs

@@ -167,7 +167,11 @@ namespace Backend.Controllers
 
                             buildMenu.left_system_url = string.Format("http://{0}:{1}{2}", building.Ip_address, building.Ip_port, buildMenu.left_system_url);
                         }
-
+                        if (buildMenu.left_planimetric_click == 1)
+                        {
+                            dictionary.Add("@left_icon_click_url_width", buildMenu.left_icon_click_url_width);
+                            dictionary.Add("@left_icon_click_url_height", buildMenu.left_icon_click_url_height);
+                        }
                         dictionary.Add("@left_system_url", buildMenu.left_system_url);
                     }
                     else if (buildMenu.left_drawing == 4)
@@ -184,9 +188,12 @@ namespace Backend.Controllers
                         dictionary.Add("@left_riser_diagram_url", buildMenu.left_riser_diagram_url);
                         dictionary.Add("@left_icon_click", buildMenu.left_icon_click);
                         dictionary.Add("@left_icon_click_url", buildMenu.left_icon_click_url);
+                        if (buildMenu.left_icon_click == 1 || buildMenu.left_planimetric_click == 1)
+                        {
                             dictionary.Add("@left_icon_click_url_width", buildMenu.left_icon_click_url_width);
                             dictionary.Add("@left_icon_click_url_height", buildMenu.left_icon_click_url_height);
                         }
+                    }
                     else if (buildMenu.left_drawing == 1)
                     {
                         dictionary.Add("@planimetric_floor_guid", buildMenu.left_planimetric_floor_guid);
@@ -293,7 +300,11 @@ namespace Backend.Controllers
 
                             buildMenu.left_system_url = string.Format("http://{0}:{1}{2}", building.Ip_address, building.Ip_port, buildMenu.left_system_url);
                         }
-
+                        if (buildMenu.left_planimetric_click == 1)
+                        {
+                            dictionary.Add("@left_icon_click_url_width", buildMenu.left_icon_click_url_width);
+                            dictionary.Add("@left_icon_click_url_height", buildMenu.left_icon_click_url_height);
+                        }
                         dictionary.Add("@left_system_url", buildMenu.left_system_url);
                     }
                     else if (buildMenu.left_drawing == 4)
@@ -310,9 +321,12 @@ namespace Backend.Controllers
                         dictionary.Add("@left_riser_diagram_url", buildMenu.left_riser_diagram_url);
                         dictionary.Add("@left_icon_click", buildMenu.left_icon_click);
                         dictionary.Add("@left_icon_click_url", buildMenu.left_icon_click_url);
+                        if (buildMenu.left_icon_click == 1 || buildMenu.left_planimetric_click == 1)
+                        {
                             dictionary.Add("@left_icon_click_url_width", buildMenu.left_icon_click_url_width);
                             dictionary.Add("@left_icon_click_url_height", buildMenu.left_icon_click_url_height);
                         }
+                    }
                     else if (buildMenu.left_drawing == 1)
                     {
                         dictionary.Add("@left_planimetric_floor_guid", buildMenu.left_planimetric_floor_guid);

Backend/Controllers/UserInfoController.cs

@@ -137,7 +137,7 @@ namespace Backend.Controllers
                     string random_password = new string(Enumerable.Repeat(chars, 8).Select(s => s[random.Next(chars.Length)]).ToArray());
 
                     //var newPassword = edFunction.GetSHA256Encryption(random_password);
-                    var newPassword = edFunction.GetSHA256Encryption("123456");
+                    var newPassword = edFunction.GetSHA256Encryption(post.Password);
 
                     //產生一組GUID
                     var guid = Guid.NewGuid();  //使用者GUID

Backend/Models/UserInfo.cs

@@ -60,6 +60,7 @@ namespace Backend.Models
     {
         public string Id { get; set; }
         public string Name { get; set; } //姓名
+        public string Password { get; set; } //密碼
         public string Email { get; set; } //信箱
         public string Account { get; set; } //帳號
         public string Phone { get; set; } //手機號碼

Backend/Views/BuildMenu/Index.cshtml

@@ -869,15 +869,16 @@
             changebuild_menu_drawing_modal(this);
         });
         //#endregion
-        $('#build_menu_icon_click_onoff_modal_div').on("click", "input[type=checkbox]", function () {
-            if ($(this).prop("checked") && $(this).val() == 1) {
-                //$('#build_menu_icon_click_url_modal_div').show();
-                $('#build_menu_icon_click_url_width_height_modal_div').show();
-            } else {
-                //$('#build_menu_icon_click_url_modal_div').hide();
-                $('#build_menu_icon_click_url_width_height_modal_div').hide();
-            }
-        });
+
+        // $('#build_menu_icon_click_onoff_modal_div').on("click", "input[type=checkbox]", function () {
+        //     if ($(this).prop("checked") && $(this).val() == 1) {
+        //         $('#build_menu_icon_click_url_modal_div').show();
+        //         $('#build_menu_icon_click_url_width_height_modal_div').show();
+        //     } else {
+        //         $('#build_menu_icon_click_url_modal_div').hide();
+        //         $('#build_menu_icon_click_url_width_height_modal_div').hide();
+        //     }
+        // });
 
         $('#build_menu_icon_click_onoff_modal_div_r').on("click", "input[type=checkbox]", function () {
             if ($(this).prop("checked") && $(this).val() == 1) {
@@ -1057,43 +1058,131 @@
             }, 'json');
         });
         //#endregion
-        function changebuild_menu_drawing_modal(selector = "input[name^='drawing']:checked") {
 
+        function changebuild_menu_drawing_modal(selector = "input[name^='drawing']:checked") {
             $(selector).each(function (index, value) {
-                let drawingParent = $(value).parents("[id^=build_menu_position]")
+                let drawingParent = $(value).parents("[id^=build_menu_position]");
+
+                // 重置所有相關的 modal
                 $(drawingParent).find('[id^=build_menu_icon_click_onoff_modal_div]').hide();
                 $(drawingParent).find('[id^=build_menu_blankurl_modal_div]').hide();
-                //$(drawingParent).find('[id^=build_menu_icon_click_url_modal_div]').hide();
                 $(drawingParent).find('[id^=build_menu_icon_click_url_width_height_modal_div]').hide();
                 $(drawingParent).find('[id^=build_menu_planimetric_floor_modal_div]').hide();
                 $(drawingParent).find('[id^=build_menu_systemurl_modal_div]').hide();
                 $(drawingParent).find('[id^=build_menu_planimetric_modal_div]').show();
-                if ($(value).val() == 2) {
+
+                // 根據 input 的值設定顯示/隱藏邏輯
+                switch ($(value).val()) {
+                    case '2':
                         $(drawingParent).find('[id^=planimetric_click]').attr("disabled", false);
                         $(drawingParent).find('[id^=build_menu_systemurl_modal_div]').show();
-                } else if ($(value).val() == 4) {
-                    $(drawingParent).find('[id^="planimetric_click"]').attr("disabled", false);
-                    $(drawingParent).find('[id^=build_menu_icon_click_onoff_modal_div]').show();
-                    if ($(drawingParent).find("[id^=icon_click_url]").prop('checked')) {
-                        //$(drawingParent).find('[id^=build_menu_icon_click_url_modal_div]').show();
-                        $(drawingParent).find('[id^=build_menu_icon_click_url_width_height_modal_div]').show();
+
+                        function toggleModalVisibilityCase2() {
+                            const planimetricChecked = $(drawingParent).find('#build_menu_planimetric_modal_div input[type=checkbox]').is(":checked");
+                            if (planimetricChecked) {
+                                $(drawingParent).find('#build_menu_icon_click_url_width_height_modal_div').show();
+                            } else {
+                                $(drawingParent).find('#build_menu_icon_click_url_width_height_modal_div').hide();
                             }
-                } else if ($(value).val() == 1) {
+                        }
+
+                        $(drawingParent).find('#build_menu_planimetric_modal_div').on("click", "input[type=checkbox]", function () {
+                            toggleModalVisibilityCase2();
+                        });
+
+                        toggleModalVisibilityCase2(); // 初始化時也要檢查一次
+                        break;
+
+                    case '4':
+                        $(drawingParent).find('[id^=planimetric_click]').attr("disabled", false);
+                        $(drawingParent).find('[id^=build_menu_icon_click_onoff_modal_div]').show();
+
+                        function toggleModalVisibilityCase4() {
+                            const planimetricChecked = $(drawingParent).find('#build_menu_planimetric_modal_div input[type=checkbox]').is(":checked");
+                            const onoffChecked = $(drawingParent).find('#build_menu_icon_click_onoff_modal_div input[type=checkbox]').is(":checked");
+
+                            if (planimetricChecked || onoffChecked) {
+                                $(drawingParent).find('#build_menu_icon_click_url_width_height_modal_div').show();
+                            } else {
+                                $(drawingParent).find('#build_menu_icon_click_url_width_height_modal_div').hide();
+                            }
+                        }
+
+                        $(drawingParent).find('#build_menu_planimetric_modal_div').on("click", "input[type=checkbox]", function () {
+                            toggleModalVisibilityCase4();
+                        });
+
+                        $(drawingParent).find('#build_menu_icon_click_onoff_modal_div').on("click", "input[type=checkbox]", function () {
+                            toggleModalVisibilityCase4();
+                        });
+
+                        toggleModalVisibilityCase4(); // 初始化時也要檢查一次
+                        break;
+
+                    case '1':
                         $(drawingParent).find('[id^=planimetric_click]').prop("checked", true).attr("disabled", true);
                         $(drawingParent).find('[id^=build_menu_planimetric_floor_modal_div]').show();
-                } else if ($(value).val() == 5) {
+                        break;
+
+                    case '5':
                         $(drawingParent).find('[id^=planimetric_click]').prop("checked", false);
                         $(drawingParent).find('[id^=build_menu_blankurl_modal_div]').show();
-                } else if ($(value).val() == 3) {
+                        break;
+
+                    case '3':
                         $(drawingParent).find('[id^=planimetric_click]').prop("checked", false).attr("disabled", true);
-                } else {
+                        break;
+
+                    default:
                         $(drawingParent).find('[id^=build_menu_planimetric_modal_div]').hide();
+                        break;
+                }
+            });
         }
 
-            })
 
 
-        }
+
+        // function changebuild_menu_drawing_modal(selector = "input[name^='drawing']:checked") {
+
+        //     $(selector).each(function (index, value) {
+        //         let drawingParent = $(value).parents("[id^=build_menu_position]")
+        //         $(drawingParent).find('[id^=build_menu_icon_click_onoff_modal_div]').hide();
+        //         $(drawingParent).find('[id^=build_menu_blankurl_modal_div]').hide();
+        //         $(drawingParent).find('[id^=build_menu_icon_click_url_modal_div]').hide();
+        //         $(drawingParent).find('[id^=build_menu_icon_click_url_width_height_modal_div]').hide();
+        //         $(drawingParent).find('[id^=build_menu_planimetric_floor_modal_div]').hide();
+        //         $(drawingParent).find('[id^=build_menu_systemurl_modal_div]').hide();
+        //         $(drawingParent).find('[id^=build_menu_planimetric_modal_div]').show();
+        //         if ($(value).val() == 2) {
+        //             $(drawingParent).find('[id^=planimetric_click]').attr("disabled", false);
+        //             $(drawingParent).find('[id^=build_menu_systemurl_modal_div]').show();
+        //             if ($(drawingParent).find("[id^=planimetric_click]").prop('checked')) {
+        //                 $(drawingParent).find('[id^=build_menu_icon_click_url_width_height_modal_div]').show();
+        //             }
+        //         } else if ($(value).val() == 4) {
+        //             $(drawingParent).find('[id^="planimetric_click"]').attr("disabled", false);
+        //             $(drawingParent).find('[id^=build_menu_icon_click_onoff_modal_div]').show();
+        //             if ($(drawingParent).find("[id^=icon_click_url]").prop('checked')) {
+        //                 $(drawingParent).find('[id^=build_menu_icon_click_url_modal_div]').show();
+        //                 $(drawingParent).find('[id^=build_menu_icon_click_url_width_height_modal_div]').show();
+        //             }
+        //         } else if ($(value).val() == 1) {
+        //             $(drawingParent).find('[id^=planimetric_click]').prop("checked", true).attr("disabled", true);
+        //             $(drawingParent).find('[id^=build_menu_planimetric_floor_modal_div]').show();
+        //         } else if ($(value).val() == 5) {
+        //             $(drawingParent).find('[id^=planimetric_click]').prop("checked", false);
+        //             $(drawingParent).find('[id^=build_menu_blankurl_modal_div]').show();
+        //         } else if ($(value).val() == 3) {
+        //             $(drawingParent).find('[id^=planimetric_click]').prop("checked", false).attr("disabled", true);
+        //         } else {
+        //             $(drawingParent).find('[id^=build_menu_planimetric_modal_div]').hide();
+        //         }
+
+        //     })
+
+
+        // }
         $('#buildMenu_table').on("click", "button.del-btn", function () {
             
             var send_data = {

Backend/Views/DeviceManage/Index.cshtml

@@ -2951,10 +2951,15 @@
                 return;
             }
 
-            if ($("#device_normal_point_value_modal").val() == $("#device_close_point_value_modal").val()) {
+            var normalValue = $("#device_normal_point_value_modal").val();
+            var closeValue = $("#device_close_point_value_modal").val();
+
+            if (normalValue != "" && closeValue != "" && normalValue != null && closeValue != null) {
+                if (normalValue == closeValue) {
                     toast_warning("點位值設定重複，請修改");
                     return;
                 }
+            }
 
             if ($("#device-kind-form").valid()) {
 

Backend/Views/UserInfo/Index.cshtml

@@ -329,6 +329,7 @@
                 var send_data = {
                     Id: selected_id,
                     Name: $("#user_name_modal").val(),
+                    Password: $("#user_password_modal").val(),
                     Email: $("#user_email_modal").val(),
                     Account: $("#user_account_modal").val(), 
                     Phone: $("#user_phone_modal").val(),

Backend/Views/UserInfo/_UserManager.cshtml

@@ -63,7 +63,7 @@
 
                         <div class="form-group col-lg-6 user-password-div">
                             <label class="form-label" for="user_password_modal">密碼</label>
-                            <input type="password" id="user_password_modal" name="user_password_modal" class="form-control" placeholder="由系統產生" disabled>
+                            <input type="password" id="user_password_modal" name="user_password_modal" class="form-control">
                         </div>
 
                         <div class="form-group col-lg-6">

BackendWorkerService/Quartz/Jobs/ArchiveElectricMeterDayJob.cs

@@ -1127,9 +1127,9 @@ namespace BackendWorkerService.Quartz.Jobs
 
                                 var endDay = System.DateTime.Now.AddDays(-1).ToString("yyyy-MM-dd");
 
-                                foreach (DateTime day in EachMonth(startDay, endDay))
+                                foreach (DateTime month in EachMonth(startDay, endDay))
                                 {
-                                    if (day.ToString("yyyy-MM") == System.DateTime.Now.AddDays(-1).ToString("yyyy-MM"))
+                                    if (month.ToString("yyyy-MM") == System.DateTime.Now.AddDays(-1).ToString("yyyy-MM"))
                                     {
                                         var preDay = now.AddDays(-1); //取得前一天
 
@@ -1154,9 +1154,9 @@ namespace BackendWorkerService.Quartz.Jobs
                                     }
                                     else
                                     {
-                                        var dayInMonth = DateTime.DaysInMonth(day.Year, day.Month);
-                                        var FirstDay = new DateTime(day.Year, day.Month, 1);
-                                        var LastDay = new DateTime(day.Year, day.Month, dayInMonth);
+                                        var dayInMonth = DateTime.DaysInMonth(month.Year, month.Month);
+                                        var FirstDay = new DateTime(month.Year, month.Month, 1);
+                                        var LastDay = new DateTime(month.Year, month.Month, dayInMonth);
 
                                         startTimestamp = string.Format("{0}T00:00:00.000+08:00", FirstDay.ToString("yyyy-MM-dd"));
 
@@ -1270,7 +1270,7 @@ namespace BackendWorkerService.Quartz.Jobs
                                     {
                                         var dayInMonth = DateTime.DaysInMonth(day.Year, day.Month);
                                         var FirstDay = new DateTime(day.Year, day.Month, 1);
-                                        var LastDay = new DateTime(day.Year, day.Month, dayInMonth);
+                                        var LastDay = new DateTime(day.Year, day.Month, dayInMonth).AddDays(1);
 
                                         startTimestamp = string.Format("{0}T00:00:00.000+08:00", FirstDay.ToString("yyyy-MM-dd"));
 
@@ -1746,9 +1746,11 @@ namespace BackendWorkerService.Quartz.Jobs
         {
             var strtday = DateTime.Parse(from);
             var endday = DateTime.Parse(thru);
-            for (var _month = strtday.Date; _month.Month <= endday.Month; _month = _month.AddMonths(1))
-                yield return _month;
 
+            for (var _month = strtday.Date; _month <= endday; _month = _month.AddMonths(1))
+            {
+                yield return _month;
+            }
         }
         private List<Dictionary<string, object>> ArrangeRawData(DeviceNumberPoint deviceNumberPoint, JObject jsonResult)
         {

BackendWorkerService/Quartz/Jobs/EmergencyRecordJob.cs

@@ -1,6 +1,7 @@
 using FrontendWebApi.Models;
 using Microsoft.Extensions.Logging;
 using Quartz;
+using Repository.BackendRepository.Implement;
 using Repository.BackendRepository.Interface;
 using System;
 using System.Collections.Generic;
@@ -52,8 +53,10 @@ namespace BackendWorkerService.Quartz.Jobs
 
                         using (HttpClient client = new HttpClient())
                         {
-                            string username = "stanGG";
-                            string password = "St12345678";
+                            var sqlObix = $@"SELECT system_value as Value, system_key as Name FROM variable WHERE deleted = 0 AND system_type = 'obixConfig'";
+                            var variableObix = backendRepository.GetAllAsync<KeyValue>(sqlObix).Result;
+                            string username = variableObix.Where(x => x.Name == "UserName").Select(x => x.Value).FirstOrDefault();
+                            string password = variableObix.Where(x => x.Name == "Password").Select(x => x.Value).FirstOrDefault();
                             string encoded = Convert.ToBase64String(System.Text.Encoding.GetEncoding("ISO-8859-1").GetBytes(username + ":" + password));
 
                             client.DefaultRequestHeaders.Add("Authorization", "Basic " + encoded);
@@ -88,7 +91,8 @@ namespace BackendWorkerService.Quartz.Jobs
 
                             foreach (var obj in filteredObjs)
                             {
-                                var newguid = Guid.NewGuid();
+                                var guid = obj.Descendants().Where(d => d.Name.LocalName == "str" && d.Attribute("name").Value == "niagara-uuid").
+                                    Select(x => x.Attribute("val").Value).FirstOrDefault();
                                 var alarm_timestamp = obj.Descendants().Where(d => d.Name.LocalName == "abstime" && d.Attribute("name").Value == "timestamp")
                                                         .Select(d =>
                                                         {
@@ -110,7 +114,7 @@ namespace BackendWorkerService.Quartz.Jobs
 
                                 var dictionary = new Dictionary<string, object>()
                                 {
-                                     {"@emergency_event_guid",newguid},
+                                     {"@emergency_event_guid",guid},
                                      {"@disaster",filterDevice.device_system_value},
                                      {"@building_tag", filterDevice.device_building_tag},
                                      {"@device_guid",filterDevice.device_guid },
@@ -120,7 +124,7 @@ namespace BackendWorkerService.Quartz.Jobs
                                 dictionaryList.Add(dictionary);
 
                             }
-
+                            // 之前以為沒有唯一識別碼(uuid)，故該table有設置一個以device_guid跟alarm_time的unique替代
                             var mergeSql = @"
                             INSERT INTO emergency_event 
                             (emergency_event_guid, disaster, device_guid, building_tag, type, alarm_time) 

BackendWorkerService/Quartz/Jobs/WeatherAPIJob.cs

@@ -42,8 +42,11 @@ namespace BackendWorkerService.Quartz.Jobs
         {
             try
             {
-                string username = "stanGG";
-                string password = "St12345678";
+                var sqlObix = $@"SELECT system_value as Value, system_key as Name FROM variable WHERE deleted = 0 AND system_type = 'obixConfig'";
+
+                var variableObix = backgroundServiceRepository.GetAllAsync<KeyValue>(sqlObix).Result;
+                string username = variableObix.Where(x => x.Name == "UserName").Select(x => x.Value).FirstOrDefault();
+                string password = variableObix.Where(x => x.Name == "Password").Select(x => x.Value).FirstOrDefault();
                 string encoded = Convert.ToBase64String(System.Text.Encoding.GetEncoding("ISO-8859-1").GetBytes(username + ":" + password));
                 HttpWebRequest Postrequest = (HttpWebRequest)WebRequest.Create(url);
                 Postrequest.Method = "POST";

FrontendWebApi/ApiControllers/AlarmController.cs

@@ -61,8 +61,10 @@ namespace FrontendWebApi.ApiControllers
 
                 using (HttpClient client = new HttpClient())
                 {
-                    string username = "stanGG";
-                    string password = "St12345678";
+                    var sqlObix = $@"SELECT system_value as Value, system_key as Name FROM variable WHERE deleted = 0 AND system_type = 'obixConfig'";
+                    var variableObix = frontendRepository.GetAllAsync<KeyValue>(sqlObix).Result;
+                    string username = variableObix.Where(x => x.Name == "UserName").Select(x => x.Value).FirstOrDefault();
+                    string password = variableObix.Where(x => x.Name == "Password").Select(x => x.Value).FirstOrDefault();
                     string encoded = Convert.ToBase64String(System.Text.Encoding.GetEncoding("ISO-8859-1").GetBytes(username + ":" + password));
 
                     client.DefaultRequestHeaders.Add("Authorization", "Basic " + encoded);

FrontendWebApi/ApiControllers/BuildController.cs

@@ -359,12 +359,22 @@ namespace FrontendWebApi.ApiControllers
                 var sub_system = await backendRepository.GetOneAsync<BuildMenuSql>(@$"select v.system_key subfull_name,me.* from building_menu me
                 left join variable v on v.system_value = me.sub_system_tag and v.system_type = 'device_system_category_layer3' and v.deleted = 0 
                 where me.building_tag = '{get.building_tag}' and me.main_system_tag = '{get.main_system_tag}' and me.sub_system_tag = '{get.sub_system_tag}' order by me.priority");
-
-                List<Floor> Floors = new List<Floor>();
+                get.sub_system_tag = get.sub_system_tag == "P" ? $"'{get.sub_system_tag}','B'" : $"'{get.sub_system_tag}'"; // 巨蛋緊急壓扣(P)跟閃光喇吧被視為同一類
+                List <Floor> Floors = new List<Floor>();
                 var floorsql = await backendRepository.GetAllAsync<Floorsql>($@"
-                select * from (select * from sub_system_floor ssf where ssf.deleted = 0 and ssf.status = 0 and ssf.building_tag = '{get.building_tag}' and ssf.main_system_tag = '{get.main_system_tag}' and ssf.sub_system_tag = '{get.sub_system_tag}' and ssf.is_link = 1) a
+                select * from (select *,
+                         CASE
+                             WHEN ssf.sub_system_tag IN ({get.sub_system_tag}) THEN 'P_B'  -- 將 'P' 和 'B' 合併為一個類
+                             ELSE ssf.sub_system_tag  -- 其他保持原樣
+                         END AS merged_sub_system_tag 
+                from sub_system_floor ssf where ssf.deleted = 0 and ssf.status = 0 
+                and ssf.building_tag = '{get.building_tag}' 
+                and ssf.main_system_tag = '{get.main_system_tag}' 
+                and ssf.sub_system_tag in ({get.sub_system_tag}) 
+                and ssf.is_link = 1) a
                 left join floor on floor.full_name = a.floor_tag and a.building_tag = floor.building_tag
                 where floor.deleted = 0
+                GROUP BY a.floor_tag, a.building_tag, a.merged_sub_system_tag
                 order by floor.priority");
                 Sub_system sub_System = new Sub_system()
                 {
@@ -402,6 +412,7 @@ namespace FrontendWebApi.ApiControllers
             catch (Exception exception)
             {
                 apiResult.Code = "9999";
+                apiResult.Msg = "9999";
                 Logger.LogError("【" + controllerName + "/" + actionName + "】" + exception.Message);
                 return Ok(apiResult);
             }

FrontendWebApi/ApiControllers/HistoryController.cs

@@ -319,6 +319,7 @@ namespace FrontendWebApi.ApiControllers
 
             try
             {
+                input.EnableLimit = false;  // CSV關閉5W筆限制
                 var apiData = await GetHistoryRealTime(input);
                 if (apiData.Value == null)
                 {
@@ -1394,6 +1395,7 @@ namespace FrontendWebApi.ApiControllers
             ApiResult<List<HistoryRawData>> apiResult = new ApiResult<List<HistoryRawData>>(jwt_str);
             apiResult.Data = new List<HistoryRawData>();
             List<string> noDataDevice = new List<string>();
+
             if (!jwtlife)
             {
                 apiResult.Code = "5000";
@@ -1439,6 +1441,8 @@ namespace FrontendWebApi.ApiControllers
                 int totalRecordCount = 0;
 
                 // 先計算總記錄數
+                if (input.EnableLimit)
+                {
                     foreach (var hi in input.HistoryItems)
                     {
                         var device_number = hi.Device_number_point.Split(":")[0];
@@ -1463,9 +1467,6 @@ namespace FrontendWebApi.ApiControllers
                                 return apiResult;
                             }
                         }
-                    else
-                    {
-                        noDataDevice.Add(hi.Device_number_point);
                     }
                 }
                 // 正式撈取資料
@@ -1473,7 +1474,7 @@ namespace FrontendWebApi.ApiControllers
                 {
                     var device_number = hi.Device_number_point.Split(":")[0];
                     var point = hi.Device_number_point.Split(":")[1];
-                    var stationName = await backendRepository.GetOneAsync<string>($"select distinct parent_path from import_niagara_item_history where device_building_tag = '{device_number.Split('_')[0]}' limit 1");
+                    var stationName = await backendRepository.GetOneAsync<string>($"select distinct parent_path from import_niagara_item_history where device_number =  '{device_number}' limit 1");
                     var tableName = await backgroundServiceMsSqlRepository.GetOneAsync<string>($"select table_name from INFORMATION_SCHEMA.TABLES where table_name like '%{stationName}_{device_number}_{point}%'");
                     if (!string.IsNullOrEmpty(tableName))
                     {
@@ -1485,31 +1486,18 @@ namespace FrontendWebApi.ApiControllers
                         //valueFacets = "range=E:{$u5176$u4ed6$u72c0$u614b=1,$u6b63$u5e38=2,$u4f4e$u96fb$u4f4d=3,$u8017$u76e1=4,$u672a$u9023$u63a5=5,$u7570$u5e38=6}";
 
                         // 檢查 valueFacets 是否包含 "range=E"
-                        string valueDisplaySql;
-                        if (valueFacets != null && valueFacets.Contains("range=E"))
+                        string valueDisplaySql = string.Empty;
+                        // 直接給千分位數值會讓前台套件顯示有問題，故頁面千分位顯示由前端處理，CSV千分位後端處理
+                        string DisplaySql = input.EnableLimit ? "ROUND(value, 2) AS Value" : " FORMAT(ROUND(value, 2), 'N2') AS Value"; 
+
+                        if (valueFacets != null)
                         {
-                            // 提取 "range=E:" 之後的部分
-                            string rangePart = valueFacets.Substring(valueFacets.IndexOf("range=E:") + "range=E:".Length);
-
-                            // 去除開頭和結尾的大括號
-                            rangePart = rangePart.Trim('{', '}');
-
-                            // 分割各個條目
-                            var entries = rangePart.Split(',');
-
                             // 存儲匹配條目的列表
                             var caseWhenStatements = new List<string>();
 
-                            foreach (var entry in entries)
+                            // 轉換 Unicode 序列為中文字符的函數
+                            string ConvertUnicodeToChinese(string unicodeSequence)
                             {
-                                // 分割 Unicode 序列和數字
-                                var parts = entry.Split('=');
-                                if (parts.Length == 2)
-                                {
-                                    string unicodeSequence = parts[0];
-                                    int correspondingValue = int.Parse(parts[1]);
-
-                                    // 轉換 Unicode 序列為中文字符
                                 var chineseCharacters = new StringBuilder();
                                 var unicodeParts = unicodeSequence.Split("$u");
                                 foreach (var unicodePart in unicodeParts)
@@ -1520,21 +1508,70 @@ namespace FrontendWebApi.ApiControllers
                                         chineseCharacters.Append(char.ConvertFromUtf32(unicodeValue));
                                     }
                                 }
+                                return chineseCharacters.ToString();
+                            }
+
+                            // 處理 range=E 的部分
+                            if (valueFacets.Contains("range=E"))
+                            {
+                                // 提取 "range=E:" 之後的部分
+                                string rangePart = valueFacets.Substring(valueFacets.IndexOf("range=E:") + "range=E:".Length);
+                                rangePart = rangePart.Trim('{', '}'); // 去除大括號
+                                var entries = rangePart.Split(',');
+
+                                foreach (var entry in entries)
+                                {
+                                    var parts = entry.Split('=');
+                                    if (parts.Length == 2)
+                                    {
+                                        string unicodeSequence = parts[0];
+                                        int correspondingValue = int.Parse(parts[1]);
+
+                                        // 轉換 Unicode 為中文
+                                        string chineseCharacters = ConvertUnicodeToChinese(unicodeSequence);
 
                                         // 添加 Case When 語句
                                         caseWhenStatements.Add($"when value = {correspondingValue} then '{chineseCharacters}'");
                                     }
                                 }
 
-                            // 最後的 SQL 語句
+                                valueDisplaySql = $"Case {string.Join(" ", caseWhenStatements)} else 'Unknow' End as Value";
+                            }
+                            // 處理 trueText 和 falseText 的部分
+                            else if (valueFacets.Contains("trueText=s:") && valueFacets.Contains("falseText=s:"))
+                            {
+                                // 提取 trueText 和 falseText 的部分
+                                string trueTextPart = valueFacets.Substring(valueFacets.IndexOf("trueText=s:") + "trueText=s:".Length);
+                                trueTextPart = trueTextPart.Split('|')[0]; // 只保留 trueText 的部分
+
+                                string falseTextPart = valueFacets.Substring(valueFacets.IndexOf("falseText=s:") + "falseText=s:".Length);
+                                falseTextPart = falseTextPart.Split('|')[0]; // 只保留 falseText 的部分
+
+                                // 如果不包含 $u，就直接使用這些字串
+                                if (trueTextPart.Contains("$u"))
+                                {
+                                    trueTextPart = ConvertUnicodeToChinese(trueTextPart);
+                                }
+
+                                if (falseTextPart.Contains("$u"))
+                                {
+                                    falseTextPart = ConvertUnicodeToChinese(falseTextPart);
+                                }
+
+                                // 添加 Case When 語句
+                                caseWhenStatements.Add($"when value = 1 then '{trueTextPart}'");
+                                caseWhenStatements.Add($"when value = 0 then '{falseTextPart}'");
+
                                 valueDisplaySql = $"Case {string.Join(" ", caseWhenStatements)} else 'Unknow' End as Value";
                             }
                             else
                             {
-                            // 如果不包含 range=E，使用原始的顯示方式
+                                // 使用原始的顯示方式
                                 valueDisplaySql = valueType.Equals("bit")
                                     ? "Case when value = 1 then 'true' when value = 0 then 'false' else 'Unknow' End as Value"
-                                : "round(value, 2) as Value";
+                                    : DisplaySql;
+                            }
+
                         }
 
 
@@ -1560,7 +1597,7 @@ namespace FrontendWebApi.ApiControllers
 
                 apiResult.Code = "0000";
                 apiResult.Msg = @$"DB無資料的設備：{string.Join(".", noDataDevice)}";
-                apiResult.Data = apiResult.Data.OrderBy(x => x.Device_number).ThenByDescending(x => x.Timestamp).ToList();
+                apiResult.Data = apiResult.Data.OrderBy(x => x.Device_number).ThenBy(x => x.Points).ThenByDescending(x => x.Timestamp).ToList();
             }
             catch (Exception exception)
             {

FrontendWebApi/ApiControllers/OperationLogController.cs

@@ -170,7 +170,7 @@ namespace FrontendWebApi.ApiControllers
             stylein12.WrapText = true;
             #endregion
 
-            var sheet = workbook.CreateSheet("電表報表");
+            var sheet = workbook.CreateSheet(input.exportOpeTypeName);
             int RowPosition = 0;
             if (result.Count > 0)
             {
@@ -202,7 +202,7 @@ namespace FrontendWebApi.ApiControllers
 
                 cell = row.CreateCell(i++);
                 cell.SetCellValue("內容");
-                cell.CellStyle = stylein12;
+                cell.CellStyle = styleLine12;
                 cell = row.CreateCell(i++);
                 cell.SetCellValue("紀錄時間");
                 cell.CellStyle = styleLine12;

FrontendWebApi/ApiControllers/WarningValueController.cs

@@ -6,6 +6,7 @@ using Newtonsoft.Json;
 using NPOI.SS.UserModel;
 using NPOI.XSSF.UserModel;
 using Repository.BackendRepository.Implement;
+using Repository.BackendRepository.Interface;
 using Repository.FrontendRepository.Interface;
 using System;
 using System.Collections.Generic;
@@ -82,8 +83,10 @@ namespace FrontendWebApi.ApiControllers
                     using (HttpClient client = new HttpClient())
                     {
                         apiUrl = Path.Combine(baseApiUrl, "obix/config/", apiUrl);
-                        string username = "stanGG";
-                        string password = "St12345678";
+                        var sqlObix = $@"SELECT system_value as Value, system_key as Name FROM variable WHERE deleted = 0 AND system_type = 'obixConfig'";
+                        var variableObix = frontendRepository.GetAllAsync<KeyValue>(sqlObix).Result;
+                        string username = variableObix.Where(x => x.Name == "UserName").Select(x => x.Value).FirstOrDefault();
+                        string password = variableObix.Where(x => x.Name == "Password").Select(x => x.Value).FirstOrDefault();
                         string encoded = Convert.ToBase64String(System.Text.Encoding.GetEncoding("ISO-8859-1").GetBytes(username + ":" + password));
 
                         client.DefaultRequestHeaders.Add("Authorization", "Basic " + encoded);
@@ -165,8 +168,10 @@ namespace FrontendWebApi.ApiControllers
                     using (HttpClient client = new HttpClient())
                     {
                         apiUrl = Path.Combine(baseApiUrl, "obix/config/", apiUrl);
-                        string username = "stanGG";
-                        string password = "St12345678";
+                        var sqlObix = $@"SELECT system_value as Value, system_key as Name FROM variable WHERE deleted = 0 AND system_type = 'obixConfig'";
+                        var variableObix = frontendRepository.GetAllAsync<KeyValue>(sqlObix).Result;
+                        string username = variableObix.Where(x => x.Name == "UserName").Select(x => x.Value).FirstOrDefault();
+                        string password = variableObix.Where(x => x.Name == "Password").Select(x => x.Value).FirstOrDefault();
                         string encoded = Convert.ToBase64String(System.Text.Encoding.GetEncoding("ISO-8859-1").GetBytes(username + ":" + password));
 
                         client.DefaultRequestHeaders.Add("Authorization", "Basic " + encoded);

FrontendWebApi/Models/Build.cs

@@ -197,6 +197,7 @@ namespace FrontendWebApi.Models
         public string point_name { get; set; }
         public string points { get; set; }
         public byte points_is_bool { get; set; }
+        public int is_RTSP { get; set; } // 巨蛋監視器控制項
         public List<DeviceNode> Device_nodes { get; set; }
         public List<DeviceItem> deviceItems { get; set; }
     }

FrontendWebApi/Models/HistoryClass.cs

@@ -259,6 +259,7 @@ namespace FrontendWebApi.Models
     {
         public string Start_timestamp { get; set; }
         public string End_timestamp { get; set; }
+        public bool EnableLimit { get; set; } = true;  // 控制是否需要限制查詢筆數
         public List<HistoryItem> HistoryItems { get; set; }
     }
 

FrontendWebApi/Views/EmergencyDeviceMenu/Index.cshtml

@@ -95,7 +95,7 @@
                     <span aria-hidden="true"><i class="fal fa-times"></i></span>
                 </button>*@
             <div class="position-absolute pos-right mr-sm-3 mt-sm-3 z-index-space">
-                @*<button type="button" class="btn btn-danger waves-effect waves-themed mr-2" id="Tcp" onclick="SendMessageAsync('D002')">取消上牆</button>*@
+                <button type="button" class="btn btn-danger waves-effect waves-themed mr-2" id="Tcp" onclick="SendMessageAsync('D002')">取消上牆</button>
                 <button type="button" class="btn btn-danger waves-effect waves-themed" id="closemodal" onclick="Closemodal()">關閉流程</button>
             </div>
             <div class="modal-body bg-white">
@@ -755,7 +755,7 @@
                 selected_device_time = $(this).parents('tr').attr('data-time');
 
                 OnSimulationExercise(selected_device_guid, selected_device_disaster, 0, selected_device_time);
-                // SendMessageAsync("D001");
+                SendMessageAsync("D001");
             });
             //#endregion
 
@@ -1952,7 +1952,7 @@
                                 CloseVerify = true;
                                 $('#emergency-verify-modal').modal('hide');
                                 $('#SimulationExercisemodal').modal('hide');
-                                // SendMessageAsync("D002");
+                                SendMessageAsync("D002");
                                 UpdateRecordFinishTime()
                                 CloseVerify = false; // 每次關閉流程都要驗證一次
                             } else {

FrontendWebApi/Views/EmergencyRecord/Index.cshtml

@@ -122,7 +122,7 @@
             <span aria-hidden="true"><i class="fal fa-times"></i></span>
             </button>*@
             <div class="position-absolute pos-right mr-sm-3 mt-sm-3 z-index-space">
-                @*<button type="button" class="btn btn-danger waves-effect waves-themed mr-2" id="Tcp" onclick="SendMessageAsync('D002')">取消上牆</button>*@
+                <button type="button" class="btn btn-danger waves-effect waves-themed mr-2" id="Tcp" onclick="SendMessageAsync('D002')">取消上牆</button>
                 <button type="button" class="btn btn-danger waves-effect waves-themed" id="closemodal" onclick="Closemodal()">關閉流程</button>
             </div>
             <div class="modal-body bg-white">
@@ -860,7 +860,7 @@
             SimulationExerciseGuid = selected_event_guid;
 
             OnSimulationExercise(selected_event_guid, selected_device_disaster, 0);
-            // SendMessageAsync("D001");
+            SendMessageAsync("D001");
         });
         //#endregion
         //#region 模擬演練 / SOP 開啟畫面
@@ -1385,7 +1385,7 @@
                                 CloseVerify = true;
                                 $('#emergency-verify-modal').modal('hide');
                                 $('#SimulationExercisemodal').modal('hide');
-                                // SendMessageAsync("D002");
+                                SendMessageAsync("D002");
                                 UpdateRecordFinishTime(function () {
                                     EmergencyEventTable.ajax.reload();
                                 });